河南省劳动监察规定
河南省人民政府
河南省人民政府令河南省劳动监察规定(第42号)
《河南省劳动监察规定》,已经省政府常务会议审议通过,现予发布施行。
省长 马忠臣
一九九八年四月一日
第一章 总则
第一条 为了保障国家劳动法律、法规、规章的贯彻实施,保护劳动者的合法权益,促进经济发展和社会稳定,根据《中华人民共和国劳动法》等有关法律、法规,结合本省实际,制定本规定。
第二条 本规定所称的劳动监察,是指县级以上劳动行政部门对各类企业、个体经济组织以及国家机关、事业单位、社会团体等用人单位遵守劳动法律、法规、规章情况进行监督检查和对违法行为依法给予行政处罚的行政行为。
第三条 劳动监察应当经常化、制度化,依法办事,实行劳动监察与群众监督相结合。
第四条 各级人民政府有关部门,用人单位和工会组织应当在各自的职责范围内,协助劳动行政部门做好劳动监察工作。
第五条 任何组织和个人对违反劳动法律、法规、规章的行为,有权向劳动行政部门检举和控告,并受法律保护。
第二章 职责与内容
第六条 劳动行政部门的劳动监察机构,具体负责劳动监察工作,履行下列职责:
(一)宣传国家劳动法律、法规、规章和政策,督促用人单位贯彻落实;
(二)监督检查用人单位遵守劳动法律、法规、规章和单位规章制度的情况;
(三)制止违反劳动法律、法规、规章的行为,并依法给予行政处罚;
(四)对劳动监察人员进行培训、管理;
(五)法律、法规、规章规定的其他劳动监察职责。
第七条 劳动监察人员在执行公务时,有权依法进入用人单位了解遵守劳动法律、法规、规章的情况,有权要求用人单位和劳动者出示有关证件,说明有关情况,查阅或者复制必要的资料,询问有关人员,并对劳动场所进行检查。
第八条 劳动监察的内容:
(一)招用职工和订立、履行劳动合同的情况;
(二)执行劳动工资的情况;
(三)执行社会保险有关规定的情况;
(四)遵守工作时间和休假制度的情况;
(五)遵守劳动安全卫生规定、标准的情况;
(六)遵守女职工和未成年工特殊保护规定的情况;
(七)职业培训、职业技能鉴定的情况;
(八)职业介绍组织遵守劳动法律、法规、规章的情况;
(九)建立劳动规章制度的情况;
(十)法律、法规、规章规定的劳动监察的其他事项。
第九条 劳动监察人员必须秉公执法,不得滥用职权,徇私舞弊,不得向他人泄露有关情况和商业秘密及有关的保密资料,并为举报者保密。
第三章 管辖
第十条 省劳动行政部门负责组织、协调、指导和管理全省劳动监察工作,并负责本省行政区域内的中央直属、省直属和在省工商行政管理机构注册登记的用人单位的劳动监察工作,查处全省范围内的重大劳动违法案件和认为应当由省查处的劳动违法案件。
市地、县(市、区)劳动行政部门按照职责分工负责管理本行政区域内劳动监察工作。
第十一条 各级劳动行政部门对管辖的案件,应当认真查处,依法及时办理。
上一级劳动行政部门认为必要时,也可以把自己管辖的案件指定下一级劳动行政部门办理。
第十二条 两个或两个以上的劳动行政部门发生管辖争议的,由发生争议的各方协商解决,协商不成的,可提请共同的上一级劳动行政部门指定管辖。
第四章 程序与方式
第十三条 劳动监察采取巡视监察、专项检查、年度审查等方式。对用人单位违反劳动法律、法规、规章引发的突发事件,劳动行政部门应当会同有关部门和工会组织及时处理。
第十四条 劳动监察人员执行公务,应有2人以上共同进行,并应当佩戴劳动监察标志,向被检查对象出示执法证件,说明有关监察事宜。
第十五条 查处违反劳动法律、法规和规章的行为,应当遵守国家规定的法律程序,并遵守下列规定:
(一)对接受举报和劳动监察时发现的违法行为,经过审查,认为有违法事实,需要依法追究的,应当登记立案;
(二)对已立案的案件,应当全面、客观、公正的调查,收集有关证据,依法进行检查;
(三)在调查取证时,可采取抽样取证,在证据可能灭失或日后难以取得的情况下,先行登记保存,并在法定时间内予以处理。
(四)调查终结时,应当依法作出给予行政处罚或不予行政处罚的决定。
(五)给予行政处罚的,在作出行政处罚决定之前,应当听取当事人的陈述,告知其行政处罚的事实、理由、依据及依法享有的权利。
(六)依法给予行政处罚的,制作行政处罚决定书,依法交付或送达当事人。
第十六条 劳动监察人员处理劳动违法案件时,与本案有利害关系,应当回避。
劳动监察人员的回避,由其所在劳动监察机构的负责人决定;劳动监察机构负责人的回避,由其所在劳动行政部门的负责人决定。
第十七条 劳动行政部门实施劳动监察,必要时可向用人单位下达劳动监察询问通知书、劳动监察指令书,用人单位自收到之日起10日内据实向劳动行政部门作出书面答复。
第十八条 劳动行政部门查处劳动违法案件,应当向上一级劳动行政部门报告;劳动行政部门制作的行政处罚决定,应当在10日内报送上一级劳动行政部门备案。
第十九条 上级劳动行政部门发现下级劳动行政部门的劳动监察行为和对案件的处理决定不当的,应当责令下级劳动行政部门予以纠正。
第二十条 劳动监察案件应当自立案之日起30日内结案,特殊情况经上一级劳动行政部门批准,可以延长,但延长时间不得超过60日。
第二十一条 劳动监察人员依法行使职权时,任何单位和个人不得阻挠、拒绝。
第五章 法律责任
第二十二条 劳动法律、法规、规章对用人单位的违法行为已规定处罚的,从其规定。劳动行政部门或其他有关行政部门应当依照法律、法规、规章的规定处罚;构成犯罪的,依法追究刑事责任。
第二十三条 劳动行政部门对违反劳动法律、法规、规章的用人单位,有权依据有关法律、法规、规章的规定责令其支付工资报酬、经济补偿、赔偿金、滞纳金等。
第二十四条 用人单位制定的劳动规章制度违反劳动法律、法规、规章规定的,劳动行政部门应给予警告,责令其改正。
第二十五条 用人单位有下列行为之一的,由劳动行政部门责令限期改正,并处以1000元罚款;对责任人员违反《中华人民共和国治安管理处罚条例》的,由公安机关予以处罚;构成犯罪的,由司法机关依法追究刑事责任。
(一)无理阻挠劳动行政部门依法行使劳动监察职权的;
(二)伪造、隐匿、毁灭证据,或者拒绝提供有关劳动监察资料的;
(三)无理拒不执行劳动行政部门下达的行政执法文书的。
第二十六条 对劳动行政部门行政处罚决定不服的,可以依法申请行政复议或提起行政诉讼,逾期不申请复议、不提起诉讼,又不履行处罚决定的,作出处罚决定的劳动行政部门可以依法申请人民法院强制执行。
第二十七条 劳动行政部门及其劳动监察人员滥用职权、玩忽职守、徇私舞弊的,由主管部门给予行政处分;构成犯罪的,依法追究刑事责任。侵犯用人单位的合法权益造成直接经济损失的,应当依法承担赔偿责任。
第六章 附则
第二十八条 本规定执行中的具体问题,由省劳动行政部门负责解释。
第二十九条 本规定自发布之日起施行。
国务院关于在我国统一实行法定计量单位的命令(附英文)
国务院
国务院关于在我国统一实行法定计量单位的命令(附英文)
国务院
命令
一九五九年国务院发布《关于统一计量制度的命令》,确定米制为我国的基本计量制度以来,全国推广米制、改革市制、限制英制和废除旧杂制的工作,取得了显著成绩。为贯彻对外实行开放政策,对内搞活经济的方针,适应我国国民经济、文化教育事业的发展,以及推进科学技术进
步和扩大国际经济、文化交流的需要,国务院决定在采用先进的国际单位制的基础上,进一步统一我国的计量单位。经一九八四年一月二十日国务院第二十一次常务会议讨论,通过了国家计量局《关于在我国统一实行法定计量单位的请示报告》、《全面推行我国法定计量单位的意见》和《
中华人民共和国法定计量单位》。现发布命令如下:
一、我国的计量单位一律采用《中华人民共和国法定计量单位》(附后)。
二、我国目前在人民生活中采用的市制计量单位,可以延续使用到一九九0年,一九九0年底以前要完成向国家法定计量单位的过渡。农田土地面积计量单位的改革,要在调查研究的基础上制订改革方案,另行公布。
三、计量单位的改革是一项涉及到各行各业和广大人民群众的事,各地区、各部门务必充分重视,制定积极稳妥的实施计划,保证顺利完成。
四、本命令责成国家计量局负责贯彻执行。
本命令自发布之日起生效。过去颁布的有关规定,与本命令有抵触的,以本命令为准。
中华人民共和国法定计量单位
我国的法定计量单位(以下简称法定单位)包括:
(1)国际单位制的基本单位(见表1);
(2)国际单位制的辅助单位(见表2);
(3)国际单位制中具有专门名称的导出单位(见表3);
(4)国家选定的非国际单位制单位(见表4);
(5)由以上单位构成的组合形式的单位;
(6)由词头和以上单位所构成的十进倍数和分数单位(词头见表5)。
法定单位的定义、使用方法等,由国家计量局另行规定。
表1 国际单位制的基本单位
------------------------------
量 的 名 称 | 单 位 名 称 | 单 位 符 号
------------------------------
长 度 | 米 | m
质 量 | 千克(公斤) | kg
时 间 | 秒 | s
电 流 | 安[培] | A
热力学温度 | 开[尔文] | K
物质的量 | 摩[尔] | mol
发光强度 | 坎[德拉] | cd
------------------------------
表2 国际单位制的辅助单位
------------------------------
量 的 名 称 | 单 位 名 称 | 单 位 符 号
------------------------------
平 面 角 | 弧 度 | rad
立 体 角 | 球 面 度 | sr
------------------------------
表3 国际单位制中具有专门名称的导出单位
----------------------------------
量 的 名 称 | 单位名称 |单位符号| 其它表示式例
----------------------------------
频 率 |赫[兹] | Hz | 1/s
力;重力 |牛[顿] | N | kg·m/秒平方
压力,压强;应力 |帕[斯卡] | Pa | N/平方米
能量;功;热 |焦[耳] | J | N·m
功率;辐射通量 |瓦[特] | W | J/s
电荷量 |库[仑] | C | A·s
电位;电压;电动势 |伏[特] | V | W/A
电 容 |法[拉] | F | C/V
电 阻 |欧[姆] | Ω | V/A
电 导 |西[门子] | S | A/V
磁通量 |韦[伯] | Wb | V·s
磁通量密度,磁感应强度|特[斯拉] | T | Wb/平方米
电 感 |亨[利] | H | Wb/A
摄氏温度 |摄氏度 | ℃ |
光通量 |流[明] | lm | cd·sr
光照度 |勒[克斯] | lx | lm/平方米
放射性活度 |贝可[勒尔]| Bq | 1/s
吸收剂量 |戈[瑞] | Gy | J/kg
剂量当量 |希[沃特] | Sv | J/kg
-------------------------------------
表4 国家选定的非国际单位制单位
---------------------------------------------
量 的 名 称| 单 位 名 称 | 单位符号 | 换算关系和说明
---------------------------------------------
| 分 | min |1 min=60s
时 间 | [小]时 | h |1 h=60min=3600s
| 天(日) | d |1 d=24h=86400s
---------------------------------------------
| [角]秒 |(") |1"=(π/648000)rad
平 面 角 | | | (π为圆周率)
| [角]分 |(') |1'=60"=π/10800)rad
| 度 |(°) |1°=60'=(π/180)rad
---------------------------------------------
旋转速度 | 转每分 |r/min |1r/min=(1/60)/s
---------------------------------------------
长 度 | 海 里 |n mile|1n mile=1852m
| | |(只用于航程)
---------------------------------------------
| 节 | kn |1kn=1n mile/h
速 度 | | |=(1852/3600)m/s
| | |(只用于航行)
---------------------------------------------
质 量 | 吨 | t |1t=1000kg
| 原子质量单位 | u |1u≈1.6605655×10的-27次方 kg
---------------------------------------------
体 积 | 升 | L,(l)|1L=1立方分米=1/1000立方米
---------------------------------------------
能 | 电子伏 | eV |1eV≈1.6021892×10的-13次方J
---------------------------------------------
级 差 | 分 贝 | dB |
---------------------------------------------
线 密 度 | 特[克斯] | tex |1tex=1g/km
---------------------------------------------
表5 用于构成十进倍数和分数单位的词头
---------------------------------
所表示的因数 | 词头名称 | 词头符号
---------------------------------
10的18次方 |艾[可萨] | E
10的15次方 |拍[它] | P
10的12次方 |太[拉] | T
10的 9次方 |吉[咖] | G
10的 6次方 | 兆 | M
10的 3次方 | 千 | k
10的 2次方 | 百 | h
10的 1次方 | 十 | da
10的-1次方 | 分 | d
10的-2次方 | 厘 | c
10的-3次方 | 毫 | m
10的-6次方 | 微 | μ
10的-9次方 |纳[诺] | n
10的-12次方 |皮[可] | p
10的-15次方 |飞[母托] | f
10的-18次方 |阿[托] | a
---------------------------------
注:1、周、月、年(年的符号为a),为一般常用时间单位。
2、[ ]内的字,是在不致混淆的情况下,可以省略的字。
3、( )内的字为前者的同义语。
4、角度单位度分秒的符号不处于数字后时,用括弧。
5、升的符号中,小写字母1为备用符号。
6、r为“转”的符号。
7、人民生活和贸易中,质量习惯称为重量。
8、公里为千米的俗称,符号为km。
9、10的四次方称为万,10的八次方称为亿,10的十二次方称为万亿,这类
数词的使用不受词头名称的影响,但不应与词头混淆。
(附英文)
DECREE OF THE STATE COUNCIL CONCERNING THE USE OF UNIFORM LEGALMEASURES IN THE COUNTRY
Important Notice: (注意事项)
英文本源自中华人民共和国务院法制局编译, 中国法制出版社出版的《中华人民共和国涉外法规汇编》(1991年7月版).
当发生歧意时, 应以法律法规颁布单位发布的中文原文为准.
This English document is coming from the "LAWS AND REGULATIONS OF THE
PEOPLE'S REPUBLIC OF CHINA GOVERNING FOREIGN-RELATED MATTERS" (1991.7)
which is compiled by the Brueau of Legislative Affairs of the State
Council of the People's Republic of China, and is published by the China
Legal System Publishing House.
In case of discrepancy, the original version in Chinese shall prevail.
Whole Document (法规全文)
DECREE OF THE STATE COUNCIL CONCERNING THE USE OF UNIFORM LEGAL
MEASURES IN THE COUNTRY
(Issued on February 27, 1984)
Since the State Council issued the Decree Concerning the Unification of
the System of Measurement in 1959, which stipulates that the metric system
is the basic system of measurement in the country, remarkable achievements
have been made in promoting the metric system, reforming the Chinese
market system, restricting the British system and abolishing the old and
mixed systems in China. In order to implement the policy of opening up to
the outside world and invigorating the economy at home, meet the needs of
developing the national economy and cultural and educational undertakings,
promote the advancement of science and technology and broaden
international economic and cultural exchanges, the State Council has
decided to further unify the measures of the country on the basis of
adopting the advanced international system of measurement. The 21st
Executive Meeting of the State Council held on January 20, 1984 discussed
and approved the following documents submitted by the State Measurement
Bureau: the Report Concerning the Use of Uniform Legal Measures in the
Country, the Suggestion Concerning the full Application of the Country's
Legal Measures, and the Legal Measures of the People's Republic of China.
The Decree is hereby issued:
I. The Legal Measures of the People's Republic of China (see the Appendix)
shall be adopted in any measurement in our country.
II. The Chinese market system of measures currently in use in daily
commercial activities may remain applicable till the end of 1990, before
which the transition to the national legal measures must be completed. As
for the reform of farmland measures, a reform plan shall be drawn up and
promulgated separately on the basis of investigation and study.
III. The reform of measures is a matter which concerns all walks of life
and broad masses of people. Leading cadres in the various localities and
departments must pay adequate attention to it and formulate vigorous and
reliable plans of implementation so as to ensure its successful
completion.
IV. The State Measurement Bureau shall be vested by this Decree with the
responsibility of the implementation thereof.
This Decree shall go into effect from the date of issuance. If any
previous provisions come into conflict with this Decree, this Decree shall
prevail.
THE LEGAL MEASURES OF THE PEOPLE'S REPUBLIC OF CHINA
The legal measures of the country (hereinafter referred to as the legal
measures) include:
(1) basic units of the international system of measurement (see Table 1);
(2) auxiliary units to the international system of measurement (see Table
2);
(3) units derived from the ones with special names in the international
system of measurement (see Table 3);
(4) units of non-international system of measurement chosen by the State
(see Table 4);
(5) units formed by combining the above units;
(6) units formed by the symbols (see Table 5) and the above units
multiplied or divided by 10.
The definitions, uses, etc. of the legal measures shall be stipulated
separately by the State Measurement Bureau.
Table 1 Basic Units of the International System of Measurement.
|============================|===================|===============|
|Name of Measure | Name of Unit | Unit Symbol |
|============================|===================|===============|
|Length | Metre | m |
|Mass | Kilogram (kilo) | kg |
|Time | Second | s |
|Electric Current | Ampere | A |
|Thermodynamic Temperature | Kelvin Degrees | K |
|Quantity of Matter | Gram-molecule | mol |
|Luminance Brightness | Candle | cd |
|============================|===================|===============|
Table 2 Auxiliary Units of the International System of Measurement
|===========================|===================|================|
|Name of Measure | Name of Unit | Unit Symbol |
|===========================|===================|================|
|Plane Angle | Radian | rad |
|Solid angle | Steradian | sr |
|===========================|===================|================|
Table 3 Units Derived from the Ones with Special Names in the
International System of Measurement
|======================|===============|============|==============|
|Name of Measure | Name of Unit | Unit Symbol|Other Formulas|
|======================|===============|============|==============|
|Frequency | Hertz | Hz | 1/S |
|----------------------|---------------|------------|--------------|
|Force, Gravity | Newton | N | Kg.m/(s*s) |
|----------------------|---------------|------------|--------------|
|Presure, Stress | Pascal | Pa | N/(m*m) |
|----------------------|---------------|------------|--------------|
|Energy; Work; Heat | Joule | J | N*m |
|----------------------|---------------|------------|--------------|
|Power; Radiant Flux | Watt | W | J/s |
|----------------------|---------------|------------|--------------|
|Electric Charge | Coulomb | C | A*s |
|----------------------|---------------|------------|--------------|
|Electric Potential; | | | |
|Voltage; | Volt | V | W/A |
|Electromotive force | | | |
|----------------------|---------------|------------|--------------|
|Capacitance | Farad | F | C/V |
|----------------------|---------------|------------|--------------|
|Resistance | Ohm | j | V/A |
|----------------------|---------------|------------|--------------|
|Conductance | Siemens | S | A/V |
|----------------------|---------------|------------|--------------|
|Magnetic Flux | Weber | Wb | V*s |
|----------------------|---------------|------------|--------------|
| | | | |
|Magnetic flux Density.| Tesla | T | Wb/(m*m) |
| Magnetic Induction | | | |
|----------------------|---------------|------------|--------------|
|Inductance | Henry | H | Wb/A |
|----------------------|---------------|------------|--------------|
|Centigrade Temperature| Degree | xC | |
| | (Centrgrade) | | |
|----------------------|---------------|------------|--------------|
|Luminous Flux | Lumen | lm | cd*sr |
|----------------------|---------------|------------|--------------|
|Illumination | Lux | lx | lm/(m*m) |
|----------------------|---------------|------------|--------------|
|Radioactive Activity | Becquerel | Bq | 1/s |
|----------------------|---------------|------------|--------------|
|Absorption Dosage | Gray | Gy | J/Kg |
|----------------------|---------------|------------|--------------|
|Dose Equivalent | Sievert | Sv | J/Kg |
|======================|===============|============|==============|
Table 4 Units of Non-International System of Measurement
|=================|==============|=============|==============================|
|Name of Measure |Name of Unit |Unit Symbol |Conversion/Explanation |
|=================|==============|=============|==============================|
|Time |Minute |min |1min=60s |
| |Hour | h |1h = 60min = 3,600s |
| |Day | d |1d = 24h = 1,440min = 86,400s |
|-----------------|--------------|-------------|------------------------------|
|Plane Angle |Second |(") |1" = (c/648,000) rad |
| |minute |(') |1'= 60" = (c /10,800) rad |
| |Degree |(x) |1 = 60' = (c /180) rad |
|-----------------|--------------|-------------|------------------------------|
|Revolving Speed |Round per | | |
| |Minute |r/min |1r/min = (1/60)/second |
|-----------------|--------------|-------------|------------------------------|
|Length |Nautical Mile |n mile |1 n mile = 1852m |
| | | |(only used for voyages) |
|-----------------|--------------|-------------|------------------------------|
|Speed |Knot |Kn |1 kn = 1 n mile/h = |
| | | |(1852/3600) m/s |
| | | |(only used for voyages) |
|-----------------|--------------|-------------|------------------------------|
|Mass |Ton |t |1 t = 1,000 Kg |
| |Atomic | | |
| |Weight Unit |u |1 u w 1.6605655 * 10 exp-27 |
|-----------------|--------------|-------------|------------------------------|
|Volum |Litre |L, (l) |1 L = 1/1000 (m*m*m) =1dm
3 |
|-----------------|--------------|-------------|------------------------------|
|Energy |Electron- | | |
| |volt |eV |1 eV w 1.6021892 * exp -19 J |
|-----------------|--------------|-------------|------------------------------|
|Differential |Decibel |dB | |
|-----------------|--------------|-------------|------------------------------|
|Line Density |tex |tex |1 tex = 1 g/Km |
|=================|==============|=============|==============================|
Table 5 Special Terms and Symbols of the Multiples and Fractions of 10
|============|=================|=========|
| Factor |Special Terms in | Symbol |
| | Chinese | |
|============|=================|=========|
| 10 exp 18 | 艾[可萨] | E |
|------------|-----------------|---------|
| 10 exp 15 | 拒[它] | P |
|------------|-----------------|---------|
| 10 exp 12 | 太[拉] | T |
|------------|-----------------|---------|
| 10 exp 9 | 吉[咖] | G |
|------------|-----------------|---------|
| 10 exp 6 | 兆 | M |
|------------|-----------------|---------|
| 10 exp 3 | 千 | k |
|------------|-----------------|---------|
| 10 exp 2 | 百 | h |
|------------|-----------------|---------|
| 10 exp 1 | 十 | da |
|------------|-----------------|---------|
| 10 exp -1 | 分 | d |
|------------|-----------------|---------|
| 10 exp -2 | 厘 | c |
|------------|-----------------|---------|
| 10 exp -3 | 毫 | m |
|------------|-----------------|---------|
| 10 exp -6 | 微 | f |
|------------|-----------------|---------|
| 10 exp -9 | 纳[诺] | n |
|------------|-----------------|---------|
| 10 exp -12 | 皮[可] | p |
|------------|-----------------|---------|
| 10 exp -15 | 飞[母托] | f |
|------------|-----------------|---------|
| 10 exp -18 | 阿[托] | a |
|============|=================|=========|
N.B.
1. "Week", "month", and "year" (the symbol for "year" is "a")
are units of time in common use.
2. The word in the bracket[] can be omitted when the omission
is not liable to cause confusion.
3. The word in the parenthesis ( ) are synonyms for the words
immediately before them.
4. The symbols for angle units (degree, miniute and second) are
put into parentheses when they are not preceded by numerals.
5. In the symbol for the litre, the small letter "l" is an
alternate synbol.
6. "r" is the symbol for "revolving".
7. "Mass" is commonly called "weight" in people's daily life and
trade.
8. "Gong li" is a popular name for "kilometre" and its symbol
is "km".
9. 10 exp 4,
10 exp 8 and
10 exp 12
are respectively called "wan", "yi", and "wan yi" in Chinese.
The use of such numerals is not affected by the special terms
listed in Table 5, but they should not be mixed up with the
special terms.
1984年2月27日